These units are designed to be toy-haulers and camping pods that will hold motorcycles and construction tools and cargo. They are specifically designed for use with the AmeriDeck SuperDeck III Power Decks. see more detail at www. AmeriDeckMidwest.com The prototype pictured here is 7' long and is sitting on a SuperDeck III with a 12" deck extension.
Tuesday, May 8, 2018
Monday, May 7, 2018
AmeriPod on SuperDeck III
AmeriPOD - The Truck Topper Shell specifically designed for use with AmeriDeck SuperDeck III.
See full details about the SuperCeck-III at our sister site www.AmeriDeckMidwest.com
See full details about the SuperCeck-III at our sister site www.AmeriDeckMidwest.com
This is the home for the all new AmeriPOD truck camper with SuperDeck III Hydraulic lift.
Owned and designed by Jeff Kurtz - AmeriDeckMidwest.com - February 1, 2018
Owned and designed by Jeff Kurtz - AmeriDeckMidwest.com - February 1, 2018
The height, length, racks, doors etc can all be changed for your suitability.
Interiors are unfinished. Changes will be quoted upon request.
Interiors are unfinished. Changes will be quoted upon request.
For details, contact us at 717-620-9676 - Jeff@kurtzinpa.com
Units are all custom and lead time is about 10-12 weeks.
Units are all custom and lead time is about 10-12 weeks.
The height, length, racks, doors etc can all be changed for your suitability.
Interiors are unfinished. Changes will be quoted upon request.
Interiors are unfinished. Changes will be quoted upon request.
For details, contact us at 717-620-9676 - Jeff@kurtzinpa.com
Uses? Overlanding, Mountain Bicycle touring, deer camp, getting to the mountains or desert.
Using a modified “landing wheel” design, AmeriDeck SuperDeck III remains 10” (TBD) off
the ground when unloaded. This keeps the AmeriTop off the ground, high and dry. The deck
stays with the Topper. Or can be removed with the topper standing on standard RV jacks.
Tie-downs to soil anchors recommended.
the ground when unloaded. This keeps the AmeriTop off the ground, high and dry. The deck
stays with the Topper. Or can be removed with the topper standing on standard RV jacks.
Tie-downs to soil anchors recommended.
Caution, when you later proceed to roll the deck back under the AmeriTop use caution. The
deck was not designed to be pushed while your vehicle is in reverse. There is no capability to
steer the deck going backwards.
deck was not designed to be pushed while your vehicle is in reverse. There is no capability to
steer the deck going backwards.
Standard units are .125 aircraft grade aluminum. The roof rack is not intended for people to stand on, but a reinforced roof is available. Among your options are 1x1" tubular "studs" on 16" centers and reinforced roof spars.
We need to add carry handles on both sides so 4 people can carry the unit.
AmeriPOD Options : 6’6” or 8’6” interior length x 84 or 96” wide across the upper section.
The very basic unit with only two rear entry doors and the kitchen door lists for $9,573 + $4,380 for
the SuperDeck-III. The decks ship from PA and the AmeriPOD ships from Northeastern Iowa.
Base unit. 84" wide x 84" long with 66" ceiling.
Options:
Exact length, width and height can be changed to suit your needs. Nominal design charge
and material charges apply.
and material charges apply.
Door and tailgate designs have many options (single door, barn doors, tailgate only, windows…)
Exterior colors or diamond plate
Reinforced roof for observation deck
Leveling jacks
Caster wheels
Fixed or Slider side windows in walls or doors
Interior drop-down bunk across front wall &/or tables
Exterior lift handles for physically moving the unit by brute strength
Adjustable ground legs to elevate the unit brom the ground
Exterior or interior toolbox doors and cabinets
Coat hooks and hanger brackets
Inside/outside 24x48" kitchen door with flip-out countertop
#overland #outback, #adventure #camper #Teardrop #pod #campingpod #boondocking #lightweightcamper #truckcamping #portable #mobile #overlandrally #overlandvacation #overlandtravel #overlandgear #overlandequipment #slideintruckcamper
Sunday, May 6, 2018
Concept pod on order!
Happy Weekend!
I'm developing a camping pod along the lines of overlanding equipment and am looking for ways to
get the word out about our "system." It's an all aluminum pod that sits in a pickup truck above an AmeriDeck hydraulic lift. The result is a pod that can be left onboard the truck or lowered to the ground at the touch of a button and left behind.
That's a lot to grasp in one sitting, but you can see more at my website www.AmeriDeckMidwest.com . Click on the tab for "camping pod".
I have my prototype on order (mid-July, alas...) and I'm working to establish a dealer/referral network.
There's a 7' version for short-bed trucks and an 8'6" version for full-size. The base striped down
unit (pod together with hydraulic lift) will retail (pre-release price) for $13,330 with lots of options.
I do have margin enough to pay referrals.
unit (pod together with hydraulic lift) will retail (pre-release price) for $13,330 with lots of options.
I do have margin enough to pay referrals.
Any interest or suggestions?
Write or call any time.
Thanks,
Jeff - - ps. My overlanding background is 22 months on BMW motorcycle.
717-620-9676
Subscribe to:
Posts (Atom)
Yes, the AmeriPod(s) are designed to mount on the AmeriDeck SuperDeck-III. I have been a rep for AmeriDeck for about three years and this...
-
AmeriPOD - The Truck Topper Shell specifically designed for use with AmeriDeck SuperDeck III. See full details about the SuperCeck...
-
This was the first video loading the toy-hauler/camping-pod onto my truck. Everything fit! More videos to follow as fast as I can shoo...